TTHDFLSA THRUST BEARINGS
Same basic roller and raceway design as the TTHDFL, except that the lower race is composed of two pieces whose faces are spherically ground to permit self-alignment under conditions of initial misalignment. TTHDFLSA bearings should not be used if dynamic misalignment (changing under load) is expected.Types TTHDFL, TTHDFLSA, TTHDFLSX and TTHDFLSV heavy-duty thrust bearings have one tapered raceway, one flat raceway and controlled-contour rollers to optimize stress distribution over the contact surface. These designs combine features offering the highest possible capacity of any thrust bearing of their size and providing superior static thrust capacity. The designs were originally developed for metal scewdown rolling mill (breaker block) applications. They also are used in heavily loaded extruders, cone crushers and other applications where a wide range of operating conditions are found.
- H–2212–A TTHDFLSA THRUST BEARINGS
- Side Mount
- 4.7500 in
- B–8750–G TTHDFLSA THRUST BEARINGS
- 200 mm
- 193 kN
- B–8424–C TTHDFLSA THRUST BEARINGS
- 2.5000 in
- 2.9000 in
- B–8424–C TTHDFLSA THRUST BEARINGS
- Bearings
- 0.0
- B–8073–C TTHDFLSA THRUST BEARINGS
- 2.4375 in
- 2.7000 in
- H–2212–A TTHDFLSA THRUST BEARINGS
- 2.5000 in
- 2.9000 in
- B–8824–C TTHDFLSA THRUST BEARINGS
- 97 mm
- KML28
- E–2004–C TTHDFLSA THRUST BEARINGS
- Bearings
- 0.0
- B–8424–C TTHDFLSA THRUST BEARINGS
- 6.7500 in
- Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Che
- B–8073–C TTHDFLSA THRUST BEARINGS
- Oil-Impregnated Bronze
- Static 8000 / Dynamic 2000 (psi)
- B–8824–C TTHDFLSA THRUST BEARINGS
- 1-1/4 in
- 50000
- B–8750–G TTHDFLSA THRUST BEARINGS
- 1.7500 in
- 1.46 lbs